Solar Farm Perimeter Lighting

Introducing

Solar farm perimeter lighting that installs on the fence, not in the ground

Ultra low-voltage lighting for utility-scale solar sites - that activates when CCTV detects movement

No trenching, no concrete footings, no competing with your EPC programme

4.5km+

Combined perimeter secured across two live projects

17.5MWp

Combined solar generation capacity protected

ZERO

Trenches dug, poles set in concrete, or licensed electrical trades required

Traditional pole-mounted lighting turns your security scope into a second construction project

Heavy machinery on site during panel installation

Licensed electrical contractors running parallel to the EPC programme

Significant concrete and civils cost at every pole position

A project-within-a-project competing for time, budget, and site access

On a solar farm, that civils penalty is often one of the largest line items on the entire security budget - before a single light has actually turned on.

THE SOLUTION

Perion Perimeter Lighting

Perion mounts directly onto the fence that's already going up.

Rather than treating lighting as a separate civil installation, Perion's system mounts directly onto your existing high-security fence: mesh, palisade, or electric - using a purely mechanical fixing process. View Installation Options

Case Studies

Learn About Current Solar Perimeter Projects
Case Study 1

Municipal Utility-Scale Solar Plant

A 2.4km perimeter around a 7MW (scalable to 10MW) solar PV plant. Installed fence-direct with zero ground disturbance, integrated with thermal CCTV so lighting activates dynamically the instant movement is detected along the boundary Read the full case study →
Case Study 2

University Campus Solar Farm

A 2.1km perimeter around a 10.5MWp solar PV plant, currently being installed on unused university land. Fixtures spaced every 6m, running on dimmed standby and set to trigger full brightness the moment the site's CCTV picks up movement Read the full case study →

Lighting That Only Turns On When It Matters

Perion's system doesn't have to run as static lighting. Paired with your site's CCTV or thermal detection, it operates as an active deterrent:

  • Standby - the perimeter holds a low or off baseline, conserving energy while cameras continuously monitor the boundary.
  • Instant activation on detection - when your CCTV or thermal system flags movement, the relevant section of perimeter jumps to full, uniform illumination.
  • Enhanced visual verification - the transition from dim to full brightness gives security operators clearer context and helps cameras capture better footage for incident review.
  • Fail-safe tamper monitoring - a built-in alarm continuously monitors for cable cuts, short circuits, or power failures, and can trigger a dry-contact relay into your existing security system.
Introduce product promotions. Write about your brand. Flash deals!